Author Topic: F33 Crunched Rudder advice sought  (Read 595 times)

Dale Hemman

  • ABS Member
  • Full Member
  • Posts: 1
F33 Crunched Rudder advice sought
« on: March 19, 2012, 01:37:01 PM »
My rudder fought with my partially opened overhead hangar door and lost. The trim tab is about half broken off and there is about a 10-inch  vertical dull wrinkle in front of that area on the rudder.  Anyone know if this will reqire a complete replacement or can something like this be re-skinned?  Know of any good shops for this with the appropriate jigs?

J. Thomas Solano

  • ABS Member
  • Full Member
  • Posts: 2
Re: F33 Crunched Rudder advice sought
« Reply #1 on: March 23, 2012, 04:34:57 PM »
Try airframe components by Williams, contact Nathan at nathan@airframecomponents.com. I recently had them reskin my elevators and they did a good job and were serious about what they said, the did what they said.